8
5
5. Attach the Rear and Front Upright Covers (5,
81) around the Upright (3) with three M4 x
19mm Screws (75).
6
36
22
67
86
86
68
23
37
6. Identify the Left Upper Body Arm (22), which is
marked with an “L” sticker.
Orient the Left Upper Body Arm (22) as shown.
Make sure that the hexagonal holes are in
the indicated location.
Insert the Left Upper Body Arm (22) into the
Left Upper Body Leg (23).
Attach the Left Upper Body Arm (22) with two
M8 x 37mm Button Screws (67) and two M8
Jam Nuts (68).
Make sure that the Jam Nuts
are inside the hexagonal holes.
Orient an Arm Cover (86) so that the wide end
is facing downward. Slide the Arm Cover onto
the Left Upper Body Arm (22).
Slide the Arm Cover (86) downward until the M8
x 37mm Button Screws (67) are covered. Press
the Arm Cover into the Left Upper Body Leg
(23).
Repeat this step for the Right Upper Body
Arm (36).
3
81
75
5
Hexagonal
Holes
