11
31
34
2
11
15
USING THE CURL PAD
For some exercises, the Curl Pad (15) must be
attached to the weight bench. Remove the 45mm
Thick Square Inner Cap (31) from the Front Leg (2).
Insert the Curl Post (11) into the Front Leg (2). Align
one of the adjustment holes in the Curl Post with the
adjustment hole in the Front Leg. Fully tighten the
Curl Knob (34) into the Front Leg.
When the Curl Pad (15) is not in use, insert the 45mm
Thick Square Inner Cap (31) into the Front Leg (2).
3
25
8
USING THE CURL BAR
Attach the Curl Bar (8) to the Leg Lever (3) with the
Pin (25).
7
7
23
23
5
6
USING THE WEIGHT RESTS
To change the height of the Weight Rests (7), remove
the Weight Rest Knobs (23). Position the Weight
Rests to the desired height in the Uprights (5, 6) and
secure them with the Weight Rest Knobs.
WARNING:
Always set both
Weight Rests (7) at the same height. Make
sure the Weight Rest Knobs (23) are inserted
into both the Uprights (5, 6) and the Weight
Rests. Do not place more than 210 lbs. (95 kg)
on the Weight Rests.
