Gold's Gym 605 CS PFTL66010.0 Скачать руководство пользователя

Страница: 4 / 32

20. Never leave the treadmill unattended while it

is running. Always remove the key, unplug

the power cord, and switch the reset/off cir-

cuit breaker to the off position when the

treadmill is not in use. (See the drawing on

page 5 for the location of the circuit breaker.)

21. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6, and HOW TO FOLD

AND MOVE THE TREADMILL on page 20.)

You must be able to safely lift 45 lbs. (20 kg)

to raise, lower, or move the treadmill.

22. When folding or moving the treadmill, make

sure that the storage latch is holding the

frame securely in the storage position.

23. Never insert any object into any opening on

the treadmill.

24. Inspect and properly tighten all parts of the

treadmill regularly.

25.

DANGER:

Always unplug the power

cord immediately after use, before cleaning the

treadmill, and before performing the mainte-

nance and adjustment procedures described in

this manual. Never remove the motor hood un-

less instructed to do so by an authorized ser-

vice representative. Servicing other than the

procedures in this manual should be performed

by an authorized service representative only.

26. This treadmill is intended for in-home use

only. Do not use this treadmill in a commer-

cial, rental, or institutional setting.

SAVE THESE INSTRUCTIONS

Содержание 605 CS PFTL66010.0

































Результаты поиска

Содержание 605 CS PFTL66010.0

Отзывы:

Похожие инструкции для 605 CS PFTL66010.0

Бренды по названию

Популярные бренды

Gold's Gym 605 CS PFTL66010.0, Руководство пользователя

Результаты поиска

Содержание 605 CS PFTL66010.0

Отзывы:

Похожие инструкции для 605 CS PFTL66010.0

Бренды по названию

Популярные бренды