GOLDMUND TELOS 360 - Universal Power Amplifier - 7
4
CONNECTIONS
Connect the power cord to the back of the amplifier and plug it into the nearest wall plug.
Use only a 3 lugs grounded plug, for safety reasons. To get the best sound from the
amplifier, avoid any multiple plug or extension cord.
If used with an analog signal, connect the interconnect between the preamp and each
power amp and position the Analog/Digital input switch to analog.
When used with a digital input signal, connect the digital input cable to the digital input and
switch the input switch to digital. Since a digital Spdif cable carries 2 channels you may link
the digital output to the next amplifier to transfer the second channel.
Connect the speaker cable to one of the red and black terminals in the back of the
amplifier. These 2 separate outputs (both 5 way post) are connected internally in parallel.
They are provided to facilitate the connection in bi-wiring systems.
You may notice that the ground of the input plug and the black speaker terminal are the
same polarity. The amplifier is non-inverting in phase.
5
SOUND QUALITY OPTIMIZATION
5.1
WARM-UP SONIC EFFECT
When the amplifier has not been used recently it will take 10 to 15 minutes for the amplifier
to reached optimum operating temperature, as the circuits have to warm up to 55
degrees Celsius.
