background image

 

 

 

 

Congratulations. 

Thank you for purchasing the GOLDMUND Reference II Turntable. 

You have acquired a highly exclusive and refined limited series product holding a number of new 

features that have never been experienced before. Please take some time to read this manual. It 

will provide you with useful information to make your pleasure of using the Reference II Turntable 

even higher. 

INTRODUCTION 

 
 

GOLDMUND REFERENCE II Turntable  

 

 

Goldmund was founded in 1978 and has ever since been dedicated to the accurate reproduction of 

sound and image. 

At Goldmund, we strive to lead in the creation, development and manufacture of the industry’s 

most advanced technologies, including audio and video systems, home - networking and music 

distribution. 

The guiding principle at Goldmund is to produce a precise sound with the least possible loss of 

quality through the different stages. Goldmund will never adopt a technology before it is sufficiently 

developed to satisfy the high quality standards we set. This is why Goldmund has often rejected 

mainstream technologies and developed its own. 

Содержание REFERENCE II























Отзывы: