4
4 - CONNECTIONS
Connect the power cord to the back of the amplifier and plug it in the nearest wall
plug. Use only a 3 lugs grounded plug, for safety reasons. To get the best sound of
the amplifier, avoid any multiple plug or extension cord.
NOTE : See below for the proper selection of the power cord receptacle, depending
of the line phase.
Connect the interconnects between the preamp and the power amp. You may either
use the RCA female sockets or the XLR. The XLR sockets, especially useful in
professional installations, are wired as follows :
1 - Grounding, Shielding.
2 - Hot.
3 - Cold.
Attention : if you want to use a symmetrical 4 wire cable, always maintain the
ground/earth switch to "Link" (lever to the black post) or you may destroy your
amplifier.
Connect the speaker cables to the red and black terminals accessible in the back of
the amplifier.
You may notice that the ground of the input plug and the black speaker terminal are
the same polarity. The amplifier is non-inverting in phase.
5 – AMPLIFIER CONTROLS
On the front plate of the GOLDMUND MIMESIS 28 amplifier you will find only two
POWER keys.
The two POWER keys have to be activated simultaneously to power the amp on.
This security feature is provided to avoid any fortuitous power on or power off.
When the two keys are pressed simultaneously, the amp switches on and the center
green led lights on showing the amp is ON.
The amplifier is immediately operative, without delay.
Содержание MIMESIS 28
Страница 1: ...GOLDMUND MIMESIS 28 POWER AMPLIFIER...
