User manual – Goldmund MIMESIS 16 UNIVERSAL PREAMPLIFIER - 10 -
2
OPERATING THE MIMESIS 16 ctd
2.2
REMOTE CONTROL
Your Mimesis 16 has built-in remote control for volume, balance and input selection.
MUTING
The mute circuit is controlled using the remote. To mute or un-mute the Mimesis 16 with the
remote, press the “MUTE/STBY” key briefly.
STANDBY
To put the Mimesis 16 in Standby mode, press the “MUTE/STBY” key continuously until the
Mimesis 16 goes to Standby, indicated by the Standby Led on the front panel.
OUTPUT VOLUME ADJUSTMENT
The VOL+ and VOL- are adjusting the global volume.
BALANCE ADJUSTMENTS
To activate the balance control, first, press the “BAL” key on the remote control. Then,
adjust the balance.
Note: Adjustment can be done when the Led on the “BAL” key is lit.
The 4 balance keys (diamond configuration) are controlling the right/left and front/rear
balance directly, maintaining a constant global volume.
The gain of the center or the subwoofer can be adjusted by pressing first the “BAL” key,
then press “center” or “sub” key and then the “VOL +” or “VOL -“.
Each balance or gain change displayed on the front panel of the Mimesis 16 corresponds
to a step of 0.4dB. The value 50 corresponds to the central balance. The led “Bal” on the
front panel of the Mimesis 16 stays lit if balance has been modified.
Note: After the last key pressed for balance adjustment, a timer of 10 seconds is activated.
At the end of this 10 sec the balance mode is automatically exit and the Mimesis 16 return
to his normal state.
