GOLDMUND METIS 7 – Integrated Amplifier - 6
1
SETTING UP THE METIS 7 (Ctd.)
1.5
FIRST INSTALLATION & CONNECTIONS
Connect the power cord to the back of the integrated amplifier and plug it into the nearest
wall plug. For safety reasons, use only a 3 lugs grounded plug.
To get the best sound from the Metis 7, avoid any multi-way plugs or extension cords.
Connect a computer, CD/DVD or Blu-ray player to the back panel of the Metis 7, using
either the USB Audio, Toslink Optical, RCA Digital or RCA Analog connectors.
When the input source is connected, connect your Metis 7 using the two speaker output
connectors located on the rear plate of your unit.
Select one of the 3 available inputs for listening using the front input switch.
Only one connection per input can be used at once. The Optical Toslink input has the
priority on the RCA Digital input, in case you want to use the Digital input, unplug the Optical
cable from the digital input.
AT T E N T I O N:
A residual high frequency noise may remain audible in some circumstances if an analog
input is left open and is selected. This disturbance has no effect on the amplifier but may be
avoided easily through the application of short-circuit plugs on all unused inputs.
NOTE
A USB driver needs to be installed on
your computer before to use it as a
source with your unit. Mac and Linux
operating system do not need driver
to be used with the Metis 7.
