background image

 

GOLDMUND LOGOS ANATTA Active Speaker - 2 

 

 

 
 

 

Thank you for purchasing the Goldmund LOGOS ANATTA active speaker. Goldmund fully 

incorporates  the  technological  expertise  developed  by  our  company  throughout  many 

years. Please take some time to read this manual. It will provide you with useful information 

to make your pleasure of listening to the LOGOS ANATTA speaker even higher. 

 

INTRODUCTION

 

 

GOLDMUND LOGOS ANATTA Active Speaker 

 

 
Goldmund  was  founded  in  1978  and  has  ever  since  been  dedicated  to  the  accurate 

reproduction of sound and image. 

At  Goldmund,  we  strive  to  lead  in  the  creation,  development  and  manufacture  of  the 

industry’s most advanced technologies, including audio and video systems. 

The  guiding  principle  at  Goldmund  is  to  produce  a  precise  sound  with  the  least  possible 

loss of quality through the different stages. Goldmund will never adopt a technology before 

it  is  sufficiently  developed  to  satisfy  the  high  quality  standards  we  set.  This  is  why 

Goldmund has often rejected mainstream technologies and developed its own. 

Содержание Logos Anatta













Отзывы: