Goldmund EIDOS 720, Руководство пользователя

Страница: 6 / 21

6
Do not look into the lens when it is operating.
It may hurt your eyes. Never let children look into the lens when it is on.
Do not turn off the main power abruptly or unplug the projector during operation.
It can lead to lamp breakage, fire, electric shock or other trouble. It is best to wait for the fan to
turn off before turning main power off.
Do not touch Air outlet grille and Bottom plate which becomes hot.
Do not touch them or put other equipment in front of Air outlet grille. The heated Air outlet grille
and Bottom plate may cause injury or damage to other equipment. Also, do not set the projector
on the desk which is easily affected by heat.
Do not look into the air outlet grille when projector is operating.
Heat, dust etc. may blow out of it and hurt your eyes.
Place of installation
For safety's sake, refrain from setting the projector at any place subjected to high temperature
and high humidity. Please maintain an operating temperature, humidity, and altitude as specified
below.
•
Operating temperature: b41Degree F (+5 Degree C) and +95 Degree F (+35
DegreeC).
•
Operating humidity: between 30 and 90%.
•
Never put any heat-producing device under the projector so that the projector does not
overheat.
•
Do not attach the projector to a place that is unstable or subject to vibration.
•
Do not install the projector near any equipment that produces a strong magnetic field.
Also refrain from installing near the projector any cable carrying a large current.
•
Place the projector on a solid, vibration free surface: otherwise it may fall, causing
serious injury to a child or adult, and serious damage to the product.
•
Do not stand the projector: it may fall, causing serious injury and damage to the
projector.
•
Slanting the projector more than ±10*(right and left) or ±15* (front and rear) may cause
trouble or explosion of the lamp.
•
Do not place the projector near air-conditioning unit or heater to avoid hot air to the
exhaust and ventilation hole of the projector.
COMPLIANCE NOTICE OF INDUSTRY CANADA
This Class B digital apparatus complies with Canadian ICES-003.
COMPLIANCE NOTICE OF FCC
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures: Reorient or relocate the receiving antenna. Increase the separation
between the equipment and receiver. Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. Consult the dealer or an experienced Radio /TV
technician for help. Changes or modifications not expressly approved by Goldmund could void
the user's authority to operate this equipment.