Goldmund EIDOS 36D, Руководство пользователя

Страница: 15 / 56

EIDOS 36D Universal Player
15
9 SETTING THE DISPLAY SYSTEM
The default setting of this player is
AUTO
, and unless you notice that the picture is distorted
when playing some discs, you should leave it set to
AUTO
.
Watching NTSC on a PAL TV/Dipslay
Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz
(NTSC) and automatically switch vertical amplitude, resulting in a display without vertical
shrinkage.
If your PAL TV does not have a V-Hold control, you may not be able to watch NTSC discs
because of picture roll. If the TV has a V-Hold control, adjust it until the picture stops rolling.
On some TVs, the picture may shrink vertically, leaving black bands at the top and bottom
of the screen. This is not a malfunction; it is caused by the NTSC to PAL conversion.
10 SWITCHING ON
After making sure that everything is connected properly and that the player is plugged in,
press
STANDBY
on the remote control or any key on the keyboard of the Eidos 36D to
switch the player on.
Also, switch on your TV, Display or Projection system and make sure that it is set to the
input you connected the Eidos 36D player to.
You can also use the
OPEN/CLOSE
button to switch on the player and open the disc tray
at the same time.
This player features a screen saver. If the player is stopped or paused and no button is
pressed for five minutes, the screen saver starts.