GOLDENSEA UV UVP36, Быстрый старт

Страница: 9 / 16

www.goldenseauv.com
4
3. Motion Sensor Operation (if the lamp with Motion Sensor)
1. Turn on the UV lamp, select the disinfection time and start, leave the room, after 2
minutes alarming (Di….Di…Di….), the UV lamps will switch on automatically, the
motion sensor will be activated.
2. The Motion sensor can ‘see’ through non-metal materials, such as wood board, plastic,
fabrics, etc. But the concrete will influence the motion sensor, and the metal board even
can stop the detecting ability. So, when the UV Lamps is working, it will turn off when it
detects that someone or something moving around within its detecting range even
outside the rooms, and it will turn on again when someone or something is left.
(detecting range: 3m in an open area without any of the above influence factors)
Note: for safety reason, the UV lamp does not work if the motion sensor is defective.
4. Fall Protection Auto Power Off
1. When a working device detects a movement of more than 45°, it will automatically
power off, thus preventing heat damage to surrounding objects, should the device fall
over by accident or misuse.
2. To make it work again after auto power off, put the device back to the normal upright
position, make sure the power plug is still well-connected to the power socket, re-start
the operation again from the beginning.
Start