Thank you for purchasing a GOLDENSEA UV product. This manual is a quick operation guide to get
you started. For more information, please always refer to the full version user manual provided.
Before unpacking, please check and be sure that the package is in good condition with no damage
on the carton during transportation. In the package, you will find the following:
UVL72
(with Reflector and UV Tube)
Remote Control
UV Glasses
Warning Sign
Floor Brackets
(with screws)
1. Product Information
Voltage
Power
Net Weight
Size
AC100-240V, 50/60Hz
80W
2.2 kg
490.8x75.8x240.3mm
①
Handle
⑥
Start - touch key
⑪
Protective Grid
②
Hanging Hook
⑦
Power Indicator
⑫
UV Tube
③
120 mins - touch key
⑧
Power Switch (I/O)
⑬
Grid Opening Tabs
④
60 mins - touch key
⑨
Power Cable
⑭
Indicator Lights
⑤
30 mins - touch key
⑩
Lamp Tube Safety Catch
2. Preparation and Notes
•
Before using the product, remove the foam (protecting the UV tube) inside the product: pull up the
4 locking Tabs to open the Grid and take the foam out carefully, then re-install the Grid.
•
Keep in mind of the following information:
Delayed Start Time
Recommended Disinfection Times/Areas
2 minutes
30mins/20m²
60mins/40m²
120mins/80m²
•
Place the supplied Warning Sign in a conspicuous place at the entrance/exit of disinfection area.
•
Make sure the path to exit the disinfection area is clear before starting the device.
•
The operator must wear anti-ultraviolet protective clothing and the UV Glasses before operating.
•
The operator must leave the disinfection area and close all entrances after starting the device,
make sure the entrances are locked or safeguarded during the entire disinfection process.
