GOLDENSEA UV UVL220, Быстрый старт

Страница: 8 / 20

www.goldenseauv.com
3
1. Manual Operation (control panel)
1) Close all the doors and windows.
2) Plug-in and power on: press the power switch <I/O> to <I>, the power indicator turns
on green.
3) Select time setting <30 mins>, <60 mins> or <120 mins> by the Time Setting touch
key, the touch key indicator light turns on.
4) Press the Start touch key, audible alarm starts beeping and red power indicator will
flash regularly for 2 minutes. The UV lamp will turn on after the 2 minutes delay when
disinfection time is set, the power indicator stays on red.
5) Once the disinfection process ends, the power indicator switches to green, an audible
alarm sounds. Open the doors and windows to ventilate the disinfected area.
2. Remote Control Operation
1) Close all the doors and windows.
2) Plug-in and power on: press the power switch <I/O> to <I>, the power indicator turns
on green.
3) Select time setting <30’>, <60’> or <120’> by the Time Setting button on the remote
control, the touch key indicator light on the device turns on.
4) Press the Start button on the remote control, audible alarm starts beeping and red
power indicator on the device will flash regularly for 2 minutes. The UV lamp will turn
on after the 2 minutes delay when disinfection time is set, the power indicator stays
on red.
5) Once the disinfection process ends, the power indicator switches to green, an audible
alarm sounds. Open the doors and windows to ventilate the disinfected area.
Note: if the remote control loses pairing with the device, re-do the pairing by pressing the
Start button on the remote control and switch on the device for 5 seconds.
One remote
control can be matched with multiple units of the same model.
Warning:
Don’t look at the disinfection light directly.
People, pets and plants should leave the
area when using the disinfection light.
Ventilate for 30-40 minutes after working.