_ 9
UVL72
UVL150
UVL220
DIMENSIONS & WEIGHT
Product dimensions
479 x 76 x 200mm
479.3 x 76 x 400mm
TBA
Inner dimension
N/A
N/A
N/A
Packing dimensions
(Carton)
N/A
N/A
N/A
Net weight
2.65 KG
3.8 KG
TBA
Gross Weight (Carton)
N/A
N/A
N/A
Dimensional drawing
OTHERS
Tube material
-
Housing Material
Aluminium alloy
Compliance
CE ETL FCC
Mounting
Surface mount or Wall mount
Accessory
Reflector
Power cord
1.8m
Instructions for use
Usage:
1. Set the mechanical switch to the ON position, then press the key to start the luminaire
2. Leave the area immediately after the disinfection time is selected. The disinfection will start automatically after 2 minutes. The disinfection times available are 30 minutes, 60
minutes and 120 minutes
3. Please turn off the mechanical switch after disinfection to avoid accidentally activating the luminaire again
Remote control:
1. Set the mechanical switch to the ON position, then press the button on the remote control to start the luminaire
2. Choose a disinfection time and the disinfection will begin after a 2 minute delay
Cautions
1. Ultraviolet disinfection lamp products emitting UV-C at 253.7nm must only be used in an environment with no living things present (humans, animals, plants)
Ultraviolet light may cause skin redness, itching, peeling, and eye conjunctive damage caused by electro-optical ophthalmitis. Never look directly at the lamp without suitable eye
protection when it is powered on and emitting light. It is essential that all people and pets leave the room before the lamp is turned on and only re-enter the room after the lamp
has been turned off/ has finished its disinfection cycle
2. Ultraviolet has a degrading effect on many materials including plastics, paper and cloth. Exposure to irradiation over long periods of time may cause the surface of the irradiated
objects to change color and or become more brittle. Never use ultraviolet sterilization lamp products emitting direct irradiation on expensive clothing, ornaments, calligraphy,
painting and other valuables
3. The surface of the lamp tube should be kept clean when using the UV disinfection lamp. It is recommended to clean the lamp tube regularly when not in use (usually every 2
weeks). When cleaning, please use a soft clean cotton cloth with a small amount of alcohol to wipe the lamp tube surface, remove the dust and oil
4. A side effect of disinfection can be an abnormal smell, similar to that of the sun drying wet bedding, we recommend that spaces are well ventilated for 10-15 minutes following
disinfection
5.UV lamps should be properly protected after disinfection and placed out of reach of children, in a safe place
6. Impact and strong vibration may cause the lamp tube to break. Should the lamp tube break, immediately turn off the power supply and dispose of the lamp, wearing protective
gloves and according to your local toxic and harmful garbage rules. Should a lamp break, immediately open the windows for 10-15 minutes of ventilation
7. Never disinfect areas with inflammable or explosive items as you may otherwise cause burning or explosion
8. If the lamp tube needs to be replaced, replace only with the original brand of lamp tube and complete the operation according to the procedures in the user manual
INDUSTRIAL PRODUCTS
