
9
C. Rear Panel
The REAR PANEL has the two heat emitter panels side-by-side. The REAR PANEL will be slightly
warped. This allows for a snug and tight fit once the sauna room is assembled. (see figure 9)
Figure 9
D. Understanding The Difference Between The Inside And Outside Of The Rear Panel
You will find the heat emitter panels on the inside of the rear panel.
Assembly Instructions
A. Choose a good location to install the sauna
1. The location must be dry, leveled, and away from any source of water
2. MAIN POWER cord must be easily accessible
3. Two adults are required for installation
4. Wood cabin installation order: Floor Panel Front Panel Right Side Panel Left Side
Panel Rear Panel Roof Panel Floor Emitter Bench Emitter Panel Bench Roof
Cover
5. Tools Required: Philips Screwdriver and Ladder
B. Installing the FLOOR PANEL
1. Place the FLOOR PANEL on the floor.
Some models have wood braces that must be installed on
the underside of the FLOOR PANEL.
Please check to see if such wood braces were packed in the
box containing the FLOOR PANEL. If so, mount according to the designated labels located on the
underside of the FLOOR PANEL. If there are no labels present on the underside of the floor panel,
then disregard mounting any wood braces as your model does not have any. Once installed, turn the
FLOOR PANEL right side up. Make sure understand which side of the FLOOR PANEL is the front.
(see Panel Descriptions)