16
1. Plug the sauna into the outlet receptacle.
2. Press the POWER button once. The POWER light will come on, the TIME DISPLAY will show 90
(minutes), the TEMPERATURE DISPLAY will show 66 (degrees Celsius), and the control panel will
flash.
3. Press the up/down arrows under the TIME DISPLAY to adjust the amount of time you want the sauna
to remain on. Press the C/F button to choose between Celsius and Fahrenheit. Press the up/down
arrows under the TEMPERATURE DISPLAY to adjust the temperature setting. Once you have set
these adjustments to the desired settings, press the STAR
T/WORK button. If you don’t press the
button for 5 seconds, the control panel will stop flashing and the set-up values will be memorized.
The WORK and HEAT lights will now be on and the emitters will now be generating heat. You will
need to pre-heat the sauna room to the set temperature before entering. Please keep in mind that
you will increase the time it takes for the sauna room to reach the set temperature if you enter the
sauna room before it has reached the set temperature.
4. During your sauna session, set-up time will count down the minutes one by one. When the time
remaining is 5 minutes, the buzzer will make a warning sound for approximately 15 seconds letting
you know you only have 5 minutes remaining. At this point, you can let the time run out or adjust the
time by pressing the up/down arrows under the TIME DISPLAY. If you do choose to adjust the time,
the control panel will flash and the emitters will stop generating heat. Once you set the time to the
desired setting, then press the START/WORK button twice and the control panel will stop flashing and
heat will began coming from the emitters once again.
5. Heating times do vary. Generally, it will take approximately twenty to thirty minutes to preheat the
sauna to 50 degrees Celsius / 122 degrees Fahrenheit. When the ambient temperature is low,
heating requires additional time. For the first few times of use, you may use 46 degrees Celsius /
115 degrees Fahrenheit as a reference starting point for a time period of about 15 minutes (this
represents the actual time you are in the sauna at the desired temperature). As you become more
comfortable and familiar with the sauna, you can increase the temperature and time period according
to personal preference.
6. When the temperature is at the set-up value, the digital control will maintain the set temperature.
The WORK light will remain on and the HEAT light will turn off. The emitters will stop generating
heat. Once the inside temperature drops approximately 4 degrees, the HEAT light will turn back on
and heat will again be generated by the emitters. With the digital control, the inside temperature will
always remain around the set-up value.
7. Reading lamps and/or roof lamps and/or color therapy lamps are operated by pressing the
respective buttons located towards the center of the control panel. These lamps are offered on
some models and are not available on all models.
8.
Chromotherapy/Color Therapy Lighting (optional)
can be operated as follows. First, you
will need to install the battery. Once the battery has been inserted into the remote, you are ready
to operate the chromotherapy/color therapy lighting system. Press the READING LIGHT button on
the sauna control panel. The white light will come on. While pointing the remote at the ceiling
light, you can press any of the colors on the remote and that color will be displayed. You can use
the SHADE button on the remote to go through a sequence of colors. If you want to turn the light
off during your sauna session, you can press the POWER button on the remote.
Pleas
e note: You
must be inside the sauna room for the remote to work. Remote may vary in appearance.
Содержание DYN9101
Страница 26: ...24 THISPAGEIS INTENTIONALLY LEFTBLANK...
