Golden MAXICOMFORT PR-510MLA Скачать руководство пользователя страница 17

Страница: 17 / 28

uto

rive

eAD

est

& l

umbAr

AnD

ontrol

perAtion

1. Getting into your lift chair

. While standing next to your chair, press button

(S7) and raise the chair to a height you can sit against. This height will vary

from person to person depending on the individual’s needs. Raise the chair

high enough so you do not have to flop down into the chair.

Flopping down

into the chair will damage it and could cause personal injury

. Press

button (S5). As the chair continues downward, adjust yourself into a position

that is comfortable to you. Continue holding (S5) until chair is in the seated

position (chair firmly on the floor), then release the button. You can also press

buttons (S6, S8, S9, S10) and the chair will move to those positions.

2. Getting out of your chair

. Press button (S7) and raise the chair to a height

that enables you to easily stand. Release the button. Return the chair to the

seated position (S5) (chair firmly on the floor) after getting out of the chair, so

children, pets or obstructions do not get under the chair. Repeat no. 1 when

you want to sit down. Micro adjustment buttons (S3, S4) can be used to raise

and lower the chair also.

Micro Adjustments

1. To recline the back of the chair

, press button (S1) and hold until the back

reaches the desired position. Then release the button.

2. To bring the back of the chair to an upright position

, press button (S2)

and hold until the back reaches the desired position. Then release the button.

3. To raise the foot rest and seat

, press button (S3) and hold until the foot rest

reaches the desired position. Then release the button.

4. To lower the foot rest and seat

, press button (S4) and hold until the footrest

closes. Then release the button.

Note: The motors are set to shut off when they

reach their fully extended or fully retracted

position if the selected button is not released. If

you should go past your desired position, select the

button to bring you back to your desired position.

You can repeat the process as often as you like.

Headrest Adjustments

1. To move the head rest up and out.

Press button

(S12) and hold it until the head rest reaches a
position suitable for you, then release the button.

2. To move the head rest down and in.

Press

button (S11) and hold it until the head rest reaches
a position suitable for you, then release the button.

Lumbar Adjustments

1. To move the lumbar out.

Press button (S14) and

hold it until the lumbar reaches a position suitable
for you, then release the button.

2. To move the lumber in.

Press button (S13) and

hold it until the lumbar reaches a position suitable for you, then release the
button.

S10

S14

S5
SP

S12

S11

S13

Содержание MAXICOMFORT PR-510MLA





























Результаты поиска

Содержание MAXICOMFORT PR-510MLA

Отзывы:

Бренды по названию

Популярные бренды

Golden MAXICOMFORT PR-510MLA, Руководство пользователя

Результаты поиска

Содержание MAXICOMFORT PR-510MLA

Отзывы:

Бренды по названию

Популярные бренды