background image

 

21 

                                V. OPERATION 

 

 

Do not sit in or attempt to move your Buzzaround XL unless the 

frame and rear carriage are securely engaged. Accidental separation of the frame 
from the rear carriage may occur and cause injury or damage. 

 

Never sit on your Buzzaround XL in freewheel mode.

 

 

Never disengage the park brake while you are operating your           

Buzzaround XL. 

 

Always make certain that your scooter park brake is engaged before     

inserting the key into the key switch and turning it to the on position. 

 

FREEWHEEL MODE 

Your Buzzaround XL™ is equipped with a freewheel lever that can set your scooter in or 
out of freewheel mode. 

 

                                

 

                              Figure 11: Freewheel Lever (Drive Position)    

 
To disengage the park brake and put your scooter in freewheel mode: 
Push forward on the freewheel lever towards the letter N (Neutral Position). See figure 11. 

 
To engage the brake and take your scooter out of freewheel mode: 
Pull back on the freewheel lever towards the letter D (Drive Position). See figure 11. 
 

 

Pushing the scooter too quickly in freewheel will cause the motor to act as 

a generator causing the scooter to become difficult to push. Freewheel slowly.

  

Содержание Buzzaround XL GB117HD













































Отзывы: