Compass TRO Owner’s Manual – Models GP615SS, GP615CC Revised 02/13/09
30
DISASSEMBLY
: Make certain that the controller power is turned off and
that the chair is NOT in freewheel mode before attempting to perform
disassembly.
SEAT REMOVAL
1. Disconnect the joystick cable from the controller cable.
2. See page 13 to complete the removal.
BATTERY REMOVAL For Transportation
After removing the seat and battery box cover:
1. Disconnect the battery connectors and unfasten battery straps. See figures 7 and
9 on page 15.
2. Use the battery handles to lift the batteries out, one at a time.
Note: The batteries weigh 39 pounds each. Please get help if you do not feel
capable of safely lifting that much weight.
For Replacement
After removing the seat and battery box cover:
1. See pages 13 and 14.
2. Disconnect the battery connectors and unfasten battery straps.
3. Use the battery handles to lift the batteries out, one at a time.
4. Remove the protective caps from the battery terminals.
5. Disconnect the positive (+) battery cables from the battery terminals, one at a time.
6. Disconnect the negative (-) battery cables, one at a time.
7. Install new batteries. See BATTERY INSTALLATION on page 15 or see the
instructions on the inside of battery box lid and follow the steps.