Golden Motor BAC-601 LCD, Руководство пользователя

Страница: 11 / 12

BAC-601LCD (MP4/SP4) User’s Guide
8
6 Setting Up Instructions
6.1 Preparations before LCD on
Make sure all the plugs is well connected and turn on the electric vehicle battery
power.
6.2 General Settings
When LCD is on ,long press "UP+DOWN"button and then enter into general settings
state.Short press"MODE" button and then shift setting state,SE1,SE2,SE3,SE4.
6.2.1 SE1.Electric Vehicle Wheel Diameter Setting
28in,700c,26in,24in,22in,20in,18in,16in can be optional.
Set the wheel diameter through "UP" and "DOWM" button to ensure speed and
mileage is correct.By default the LCD display is 20in.
6.2.2 SE2.Wheel Diameter Scale Factor Setting
Setting the wheel diameter scale factor can obtain the accurate speed and mileage
value through "UP" and "DOWN" button.
The default setting is 1.00 and minimum is 0.7 and maximum is 1.3.(Note:actual
wheel diameter = wheel diameter X
wheel diameter scale factor )
6.2.3.SE3 .Backlight Brightness Settings
Backlight brightness can be chosen between 1-3.
Through "UP" and "DOWN"button ,shift brightness:
Only after the failure has been ruled out,LCD can exit the error display screen.The electric vehicle can
not continue driving when the failure appear.