Golden Media Hypercube, Руководство пользователя

Страница: 26 / 139

11.3.1 Integrated Ethernet
Select “Integrated Ethernet“and press the OK-Button. Select the
“Adapter settings“option and press the OK-Button. Use the
Navigation-Buttons and the Numeric-Keypad to change the
settings.
Use interface:
This option toggles the integrated Ethernet interface on and off.
Use DHCP:
If set to “yes“your STB will get its IP from a DHCP server. If you
are using a router to access the internet you usually have a
DHCP server. Disable this option to set a static IP address.
Manually setting an IP address
These settings are only needed if you have selected “no“ on the
“Use DHCP“ option before.
IP Address:
You can assign any IP address to you STB. The only expectation is the 192.168.0.1 IP since it usually is
reserved for you internet router and should therefore not be used.
Network test
The network test will assist you in finding possible sources of error in your network configuration. Press the
green Options-Button to start the test or to repeat it. Press the yellow Options-Button to abort the test.
Once the test has finished you can get additional information and help to every sub-item of the test. Use the
Navigation-Buttons up/down to select the item and press the OK-Button.
26