GOLDEN MASK DEEP HUNTER Pro AE, Инструкция по эксплуатации

Страница: 10 / 15

GM Electronics Ltd
.
Golden Mask Deep Hunter Pro AE
– Instruction manual
10
After reaching a certain signal strength (which will be indicated on
the indicator
“SIGNAL”
), the identification of the type of metal
through the LEDs mounted in the indicating
“SIGNAL”
will start to
work. The red color light indicates non-ferrous metals and green
color light indicates ferrous metals (iron). To present a high
probability of proper metal type identification, when you detect a
target, move the coil outside the target area, press the
“SMART
TUNE
”
button and then pass the antenna over the target from a
different direction. Repeat as many times as you want to identify
the type of the metal more securely. With a little experience, anyone
can learn to recognize the nature of the various signals, which will
lead to better use of the great capabilities of the Golden Mask Deep
Hunter Pro AE
8. Silent mode
In silent mode the detector can be switched with the
“AUDIO –
On/Silent
”
knob, when it is set to "Silent" .
This mode can be chosen at any time. In silent mode
the “ticking”
sound is not heard and the presence of metal target will be
indicated with a
high pitch tone for non-ferrous metals , and low
pitch tone for ferrous metals .
In the silent mode the sensitivity is lower, but this mode is very
suitable for highly
“trashy" sites (where some small, mainly iron
metal objects are present, and these objects are not an objective of
the search). In this mode, the detector achieves a stronger
“rejection” of junk metals and provides a much more efficient search
of large objects.