GOLDEN MASK Deep Hunter Pro 5, Инструкция по эксплуатации

Страница: 11 / 16

GM Electronics Ltd
.
1 . Turn “Off” the detector, remove the coil jack and plug the
charger jack into the connector labeled “Charge” on the front
panel of the device.
2 . Place the detector in an upright position near a power
outlet with voltage 120-240V and connect the automatic charger
into the outlet.
The charging is indicated with a RED-color LED light on the
charger housing.
When the charging process is completed, the LED light turns
blue.
The duration of charge of an discharged battery is about 6 -
8 (8-10) hours.
When the charge is completed, remove the charger from the
power socket and then remove the charger jack from the
connector
“Charge” .
3 . Turn “On” the detector and check the charge level by
pressing “Battery Check” button. With a properly charged
battery, the arm of the indicator must show a value greater than
“8” . If the reading is lower than “8” , reconnect the charger and
repeat the charging process!
To replace the battery, you should contact your Golden
Mask Deep Hunter Pro5 dealer.
WARNING!
Never replace the battery without consulting your dealer.
Replacing the battery with a non-genuine one could damage
the detector and voids the warranty!
12. Relative depth of detecting of metal objects in different
modes
Golden Mask Deep Hunter Pro5 – Instruction manual
11