12
ASSEMBLY
Unpacking
• Remove all packaging materials.
• Remove remaining packing and package inserts (if included).
• Check that the package contents are complete.
• Check the appliance, the power cord, the power plug and all accessories for
transportation damage.
• Keep the packing materials as long as possible until the end of the warranty
period.
WARNING
Packaging materials are not toys! Children must not play with plastic bags!
Danger of suffocation!
INSTALLATION OF THE METAL BRACKET
(Fig. 1 and 2)
• Unplug the tile cutter from the mains supply.
• Remove the cover (45° vertical fence) of the water
reservoir.
• Remove the two screws and washers from the top of the
deck, slide the metal bracket into the desired position and
then fix in place re-using the two screws and washers.
Ensure the bracket is perpendicular to the deck and
positioned inline with the blade.
Loosening these screws allows some minor adjustment to
ensure the bracket does not foul the tile when cutting.
• Put the cover (45° vertical fence) back into position.
INSTALLATION OF THE DIAMOND DISC
(Fig. 2 and 3)
• Unplug the tile cutter from the mains supply.
• Remove the cover (45° vertical fence) of the water tank.
• Insert the inner flange, the diamond disc and the outer
flange on the spindle then tighten the bolt clockwise with
the two spanners provided.
• Insert the blade lower guard with the chain into the
notches then tighten the screw.
• Put the metal cover back into position.
fig.1
fig.2
fig.3
WARNING !
Be sure to observe the rotational direction of the cutting disc when fitting! Be sure
to observe the free-wheeling of the cutting disc when fitting!
