OPERATION
Plug into power supply and switch on at the mains.
Press power button (14) once to turn the power on.
The unit will start in continuous mode and
‘CO’
will be
displayed.
HUMIDITY SETTING
To change the humidity setting, press the up button
(15) one press at a time through the settings - CO-40-
50-60-70 or press the down button (15) one press at a
time through the settings - 70-60-50-40-CO
Press up and down buttons (15) at the same time 2s to
activate the child lock, repeat the same process to
unlock the child lock.
WARNING: Keep all objects at least 1 metre from the
front, sides and rear of the appliance.
WARNING: In order to avoid overheating or risk of
fire, do not cover the appliance.
WARNING: Never leave this appliance unattended
when in use.
WARNING: Do not use this appliance with a
programmer, remote-control system, separate timer
or any other device that switches the appliance on
automatically.
Operating your Appliance
Always choose a safe location for your appliance, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. This
appliance requires no installation, it should be used solely as a portable appliance.
14. Power button
15. Up and down buttons
16. Mode selection button
17. Fan speed button
18. Timer button
19. Running light
20. Humidity light
21. Timer light
22. Tank full light
23. Defrost light
24. Mode light
25. Fan speed light
Note: When the appliance is turned on for the first
time, it may release a slight odour. This odour is a
normal occurrence caused by the initial starting of
the unit and should not occur again.
Leave the appliance to stand for one hour after
transport or after the unit has been on its side before
connecting it to the mains supply to let the refrigerant
settle.
Ensure all external windows and doors are closed
before turning on the unit.
Ensure that the water container is positioned
correctly.
CONTROL PANEL
FAN SPEED
Press the fan speed button (17) once to change fan
speed between low, med and high.
Note: In auto operation mode, this button is invalid.
TIMER
Press timer button (18) one press at a time through
the settings - 1-2-4-6-8Hr. Once the time has elapsed
the unit will shut down.
Note: If working mode is changed, the timer function
will reset to off.
