Operating your Appliance
Control panel
Operation:
1)
Plug in the power cable, a “Beep” sound is heard. The heater is now in “Stand By”
mode, the ON/OFF indicator light will be green.
2) Press the ON/OFF button, the LED light and heater will turn on. The heating tube
and the LED light are preset to power level 3.
3) To adjust the unit to your preferred heat or light setting. Press the heat control or
light control button, the digital display will flash for 5 seconds, this will now allow
you to adjust the heat or light output. Do this by repeatedly pressing the
appropriate button to cycle through the five heat or light settings. The display will
stop flashing after 5 seconds, this is to indicate it has exited the adjustment mode.
4) If you want to turn off either the heater or light, press the heat or light button and
press ON/Off button immediately. To turn the heater or the light on again, push
the desired function button. The mode you have turned off will be in standby
mode, indicated by a green light on the control panel.
5) Turn off all heat and light by pressing ON/Off button , this will turn the heater to
“Stand By” status
ON/OFF button: Use this to turn the heater on or off
This will be Green when the heater is in standby mode
Heat control button: Use this to control the level of heater
output. There are five heat settings. Continue to press this
button to cycle through to your desired setting.
Light control button: Use this to turn on / off the LED
ambient light. There are five brightness settings. Continue to
press this button to cycle through to your desired setting.
Digital Display: This will show the current setting being
adjusted by the remote control
Remote control: Buttons on the remote control correspond
with the functions on the control panel listed above