Operating your Dehumidifier
CARE AND CLEANING
The Dehumidifier requires regular cleaning to ensure
trouble free operation:
Unplug the Dehumidifier from the mains supply before
cleaning.
Use a damp cloth (not wet) to wipe the exterior of the
Dehumidifier to remove dust and dirt.
Never use solutions such as benzene, thinners or
polishing agents.
Use a vacuum cleaner to remove dust and fluff from
around the grills.
Ensure the Dehumidifier is dry before plugging back
into the mains supply to charge.
Do not attempt to dismantle the Dehumidifier. There
are no user serviceable parts. For service or repair,
contact an authorised electrical service technician.
TO CLEAN THE AIR FILTER:
Unplug the Dehumidifier from the mains supply.
Remove the filter from the top of the unit, clean the
filter with a vacuum or with water. Dry the filter.
Ensure the filter is completely dry before placing back
in the unit.
Never use unit without the air filter.
STORAGE
To store the unit, remove the plug from the socket and
empty the container. Allow the container and the
Dehumidifier to dry completely. Clean the air filter.
Store the device in a dust-free location, preferably
covered with a sheet of plastic.
Do not use this Dehumidifier with a programmer,
remote-control system, separate timer or any other
device that switches the Dehumidifier on automatically.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase.
(Refer to back of booklet).
WARNING Keep the front inlet grill and the top
outlet free from air blocking materials.
CONTENTS
Dehumidifier unit including water container.
AC Power adapter
CONTROL SWITCH
0
= Off
I
= On
Check that the control switch is set to Off position
before plugging the Dehumidifier into the mains supply.
Ensure that the water container is positioned correctly.
Plug into power supply.
To turn the Dehumidifier on, press the ON/OFF button
to
“On” position, the green LED indicator light will
illuminate and the unit will begin to operate.
To switch the unit off, switch the On/Off button to the
“Off” position and disconnect from the mains supply.
WATER CONTAINER
When the water container is full the unit will switch off
automatically and the yellow LED indicator light will
illuminate.
To remove the water tank check that the control switch
is set to Off position and the plug is disconnected from
the mains supply.
Pull the water tank out from the Dehumidifier and
empty out the water. Ensure that the water container is
positioned back in the unit correctly in order for it to
dehumidify again.
SAFETY
Always keep the unit in an upright position to avoid
water leakage.
IMPORTANT! NEVER COVER THIS DEHUMIDIFIER!
Always choose a safe location for the Dehumidifier, keeping in mind the
safety precautions outlined. Ensure all packaging has been removed from
the unit before use. This appliance requires no installation, it should be
used solely as a portable appliance.
Goldair
– New Zealand
Monday
– Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair
– Australia
Monday
– Friday 8am-5pm
Phone +61 (0)3 9336 4423
Phone 1300 465 324
SUPPORT AND TECHNICAL ADVICE
