SAFETY DEVICES
This appliance has three protection devices:
1.
Tilt switch - this will automatically turn the
appliance off if the appliance is not in the
appropriate operating position.
2.
Resettable thermal link - this will automatically
disconnect the power to the appliance at a pre-
set overheat temperature. After cooling down it
will reset and power on again. If this occurs,
investigate what is causing the appliance to
overheat.
3.
Thermal fuse - this disconnects the appliance
permanently in case of overheating. (It is non
resettable).
CAUTION: The appliance generates heat during
use. Proper precautions must be taken to prevent
the risk of burns, scalds, fires or other damage to
persons.
This appliance is filled with a precise quantity of
special oil. Repairs requiring opening of the oil
container
are
only
to
be
made
by
the
manufacturer or his service agent who should be
contacted if there is an oil leak. When scrapping
the appliance, follow the regulations concerning
disposal of oil.
SUPPORT AND TECHNICAL ADVICE
CARE AND CLEANING
The appliance requires regular cleaning to ensure
trouble free operation:
Unplug the appliance from the mains supply before
cleaning.
Ensure that the appliance has been allowed to cool
down completely before cleaning.
Use a damp cloth (not wet) to wipe the exterior of
the appliance to remove dust and dirt.
Never use solutions such as benzene, thinners or
polishing agents.
Use a vacuum cleaner to remove dust and fluff from
around the grills and fins.
Ensure the appliance is dry before plugging back
into the mains supply.
Do not attempt to dismantle the appliance. There
are no user serviceable parts. For service or repair,
contact an authorised electrical service technician.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of
purchase.
Goldair
– New Zealand
Monday
– Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair
– Australia
Monday
– Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
Care and Cleaning
TECHNICALSPECIFICATION:
Model No:
GSOC1118
Supply:
230-240VAC 50Hz
Wattage:
2300-2400W
IMPORTANT: Please fit the wheel assemblies as
per the diagram. Any other position may affect the
stability of the heater.
WARNING: Operate the heater in normal upright
position only with wheel assemblies attached to
the bottom. Any other position could create a
hazardous situation.
