Operating your Oil Column Heater
CARE AND CLEANING
The heater requires regular cleaning to ensure trouble
free operation:
Unplug the heater from the mains supply before
cleaning.
Ensure that the heater has been allowed to cool down
completely before cleaning.
Use a damp cloth (not wet) to wipe the exterior of the
heater to remove dust and dirt.
Never use solutions such as benzene, thinners or
polishing agents.
Use a vacuum cleaner to remove dust and fluff from
around the grills.
Ensure the heater is dry before plugging back into the
mains supply.
Do not attempt to dismantle the heater. There are no
user serviceable parts. For service or repair, contact
an authorised electrical service technician.
CAUTION
The oil column heater generates heat during use.
Proper precautions must be taken to prevent the risk
of
burns, scalds, fires or other damage to persons
.
WARNING: Only operate the heater in normal upright
position. Do not cover the heater vents or use it for
drying clothes or towels.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase.
(Refer to back of booklet).
ASSEMBLY
Before using the heater, the rear foot (supplied
separately in the carton) must be fitted to the unit.
Carefully turn the unit upside-down. Slide the foot
onto the last fin at the rear of the unit and secure the
foot with the screws provided. The screw pack to
attach the foot to your heater will be taped to the foot
or taped to the plug head.
WARNING Keep all objects at least 1 metre from
the front, sides and rear of the appliance.
HEAT CONTROL SWITCH
The control switch positions are:
OFF
ON
Check that the Heat Control Switch is set to Off
position before plugging the heater into the mains
supply.
THERMOSTAT
Turn the thermostat knob clockwise until you reach
the maximum temperature on the graduated scale.
When the desired room temperature is reached,
slowly turn the knob anti-clockwise until the heater
turns off (you will hear a click). The heater will now
cycle on and off to maintain the set temperature.
SAFETY DEVICE
This appliance has two protection devices. The first
device, automatically disconnects & reconnects the
appliance at a pre-set temperature. The second
device disconnects the appliance permanently in case
of overheating, by means of a thermal fuse (it is non
resettable).
IMPORTANT! NEVER COVER THIS HEATER!
Do not use this heater with a programmer, separate
timer, separate remote-control system or any other
device that switches the heater on automatically.
Always choose a safe location for the heater, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the
unit before use. This appliance requires no installation, it should be used
solely as a portable appliance.
Goldair Select
– New Zealand
Monday
– Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair Select
– Australia
Monday
– Friday 8am-5pm
Phone +61 (0)3 9336 4423
Phone 1300 465 324
SUPPORT AND TECHNICAL ADVICE
