Goldair GPH110 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 12

Goldair GPH110 Скачать руководство пользователя страница 10

TIMER

When the machine is on, press the Timer button (14) for timing shutdown, then press the up button
(6) or down button (7) to set timer.
When this selected  time has elapsed, the heater will turn off.
When the heater is off, press the Timer button (14) for timing start up, then press the up button (6)
or down button (7) to set timer.
When the selected time has elapsed the heater will turn on.
The Timer setting is one hour units within 24 hours.

Note: You cannot set a specific turn on or turn off time.

LOCKING THE CONTROL PANEL

Press the program selector button (5) to make the program type flash
Press the programming button (8) and the setting of the time button (11) at the same time until the
lock symbol (padlock) is displayed.
All the control functions are now locked, and the buttons will no longer operate until unlocked.
Do the same sequence to unlock the control panel

LOW BATTERY INDICATOR

When the timer battery is low, the LCD screen will flash the low battery symbol to remind you to
replace the battery. The control panel (

*Electronic models only)

requires 1x CR2032 battery

(included).

Operating Your Electronic Panel Heater

CR2032

«
...
8
9
10
11
12
»

Содержание GPH110













Отзывы:

Нет отзывов