Goldair GHBP100, Руководство по эксплуатации

Страница: 8 / 12

HAND WASHING
For pillows with fixed controllers, the controller or switch must not be allowed to get
wet during washing.
Presoak the Body Pillow for 15 minutes in a mild soap and lukewarm water solution.
Ensure the water temperature is less than 30°C.
Gently squeeze the soap suds through for a few minutes.
Rinse in fresh lukewarm water.
AIR DRYING
Gently stretch the Body Pillow to its original size.
Air dry over a clothes line or air drying rack.
DO NOT
use clothes pegs or clips of any kind.
DO NOT
use the Body Pillow until it is completely dry.
MACHINE WASHING (WITH DETACHABLE CONTROLLER ONLY)
Unplug and remove the Body Pillow controls.
Presoak the Body Pillow for 15 minutes in a mild soap and lukewarm water solution.
Ensure the water temperature is less than 30°C.
Wash in mild soap and lukewarm water on the delicate or gentle cycle for 2 minutes.
Rinse in fresh lukewarm water.
MACHINE DRY (WITH DETACHABLE CONTROLLER ONLY)
Place the body pillow into the dryer and tumble dry on low setting until damp.
Approx 30 minutes.
Remove the body pillow while it is still damp and gently stretch to its original size.
Continue to air dry over a clothes line or air drying rack. (DO NOT use clothes pegs or
clips of any kind).
DO NOT USE IF DAMP OR WET
Care and Cleaning of your Heated Body Pillow
SUPPORT AND TECHNICAL ADVICE
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@cdb.co.nz
Goldair – Australia
Monday – Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
info@cdbgoldair.com.au
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase.
TECHNICAL SPECIFICATION
Models: GHBP100
Supply: 220-240VAC 50Hz
Wattage: 65W