![background image](http://html1.mh-extra.com/html/goldair/ggoh300/ggoh300_operating-instructions-manual_2240367013.webp)
Assembly Procedure
Page 12
Step 6.
The Patio Heater is intended to be used with a standard 9kg LPG cylinder. This is the type
of cylinder that can be refilled at petrol station or swapped for similar cylinder.
Place the cylinder in position into the stand, ensuring that the cylinder sits flush on the
ground inside the unit.
Take the hose that came with the Patio Heater, check that it has a rubber seal on the
regulator end of the hose and connect this end to the gas cylinder, ensuring that the hose
is not twisted. You
won’t need a spanner here. Just turn the fitting in an anti clockwise
direction and hand tighten as much as you can. This should seal it sufficiently.
It is important to conduct a leak test prior to use. Follow leak test procedure.
(Procedure located on Page 2 of this manual)
Important: The hose must not be kinked or twisted.