background image

OPERATION
Ensure that the water container is positioned correctly.
Ensure all external windows and doors are closed before turning on the unit.

Plug into power supply and switch on at the mains. Press POWER button and the unit
will start in continuous dehumidification mode. (The POWER button also allows you to
turn the unit Off).
Note that if the appliance has been operating for more than 10 minutes when you
switch it off it will change to CONTINUE mode and run for approximately 5 minutes to
cool the unit before switching off.

MODE FUNCTION
Select the desired fan speed by pressing the SPEED button.
L (Quietest dehumidification) setting.
M (Normal dehumidification) setting.
H (Fast dehumidification) setting.
The LED indicator light will illuminate to identify the current status.

HUMID FUNCTION
The appliance will default to continuous operation when it is first turned on.
Room humidity ratio (60%/50%/40%) can be set by pressing the Humid button.

When 40% is set: The humidistat will detect if the room relative humidity (RH) is
lower

38% and the unit will automatically turn the dehumidification process off.

The LED light showing that the 40% will also go out.

When 50% is set: The humidistat will detect if the room RH is lower

48% and the

unit will automatically turn the dehumidification process off. The LED light showing
that the 40% will also go out.

Like wise for the 60% setting.

NOTE: The fan will continue to run to draw air over the humidistat to sense when the
humidity changes.
The CONTINUE setting will attempt to remove all humidity from the room.

AIR ANGLE
The louvre automatically turns to the upright position when the appliance is first 
switched ON.

Press “AIR ANGLE” button once and the air louvre will move from 90

° upright position to 

45° to aid clothes drying; the LED will illuminate. Press again and the air louvre will 
return to the 90° angle and the LED turns off.

PLEASE NOTE: water from clothes must not drip onto the unit, as this may damage the 
unit and/or raise the risk of electric shock.

Operating Your Dehumidifier

Содержание GD350













Отзывы: