Operating your Dehumidifier
IMPORTANT!
NEVER
COVER
THIS
DEHUMIDIFIER!
TANK FULL INDICATOR
When the water tank is full, the TANK FULL light will
illuminate and the unit will stop working until the water
tank has been emptied and correctly replaced. The
Dehumidifier will continue dehumidifying when the
compressor automatically restarts after approximately
three minutes.
DEFROST
Occasionally the refrigerant around the motor can
become very cool, this will cause the unit to go into
defrost mode. The compressor will turn off and the
fan will continue to run. The DEFROST indicator light
will illuminate on the control panel.
This is a normal function for the dehumidifier and
cannot be controlled by the user.
Once the unit has completed defrosting, the
compressor will turn back on and continue to
dehumidify.
WARNING Keep all objects at least 1 metre from
the front, sides and rear of the appliance.
Leave the appliance to stand for one hour after
transport or after the unit has been on its side before
connecting it to the mains supply to let the refrigerant
settle.
Ensure all external windows and doors are closed
before turning on the unit.
Ensure that the water container is positioned
correctly.
Plug into power supply and switch on at the mains.
To turn the Dehumidifier on, press the ON button.
The unit will start to dehumidify. The operation Light
will flash until the compressor starts to run, the light
will stop flashing and remain on when the compressor
has started.
The compressor will switch off automatically when the
water container is full. THE FAN WILL CONTINUE
TO RUN.
As long as the water container is not full, the
Dehumidifier will continue to operate until it is
switched off manually.
If the Dehumidifier is switched off manually and then
switched back on, the compressor will start to operate
after three minutes.
To turn the Dehumidifier off, press the OFF button.
Wait at least 3 minutes between switching the unit off
and back on again to prevent damage to the
compressor.
If the power supply is cut at the mains without the
dehumidifier being powered Off first, allow at least 10
minutes before switching the unit back on.
If the unit fails to operate after it has been switched
off at the mains before allowing to power Off; switch
off the power at the power supply, leave the unit to
stand for 10 minutes. Switch the power supply back
on then Press the On button again on the unit, the
unit should now operate.
Please note: This Dehumidifier has a pre-set humidity
setting of 50%. If the humidity in the room drops
below 50%, the unit will stop dehumidifying until the
humidity increases to over 50% again.
The recommended operating temperature range is
15
℃
to 35
℃
.
Always choose a safe location for the Dehumidifier, keeping in mind the
safety precautions outlined. Ensure all packaging has been removed from
the unit before use. This appliance requires no installation, it should be
used solely as a portable appliance.
Содержание GD270
Страница 8: ......
