Your fan has been boxed unassembled to
minimise packaging waste. Each part is
designed to fit together and be disassembled
easily for cleaning and storage.
Start with the base and post as follows.
Remove
the
tilt
adjustment
knob
by
unscrewing the knob and slide the tilt
adjustment bolt out. Remove the base thumb
screw and the base washer by unscrewing as
shown.
Assembly
Components
Fit the post into the recess in the top of the
base and whilst holding it in place, turn over to
access underneath. Place the washer over the
hole and then insert the base thumb screw.
Tighten securely, then turn the assembly the
right way up and sit on a flat surface.
1.
Fan head assembly
2.
Tilt range screw
3.
Tilt adjustment knob
4.
Height adjustment knob
5.
Base
6.
Base thumb screw
7.
Oscillation pin
8.
On / Off / Speed control
9.
Tilt range knob
10.
Tilt adjustment bolt
11.
Post
12.
Base washer
