background image

General Care and Safety Guide

20. Never place appliance close to radiant heat source.
21. Never operate in areas where petrol, paint or other flammable liquids are used or

stored.

22. Never use the appliance to dry clothes.
23. Never insert or allow foreign objects to enter any ventilation or exhaust opening,

as this may cause an electric shock, fire or damage to the appliance.

24. Never use abrasive cleaning products on this appliance. Clean with a damp cloth

(not wet) rinsed in hot soapy water only. Always remove plug from the mains
supply before cleaning.

25. Never connect the appliance to mains supply until completely assembled and

adjusted.

26. Never remove plug from power socket until the appliance has been switched off.
27. Never remove plug from power socket by pulling cord

always grip plug.

28. Never twist, kink or wrap the cord around the appliance, as this may cause the

insulation to weaken and split. Always ensure that all cord has been removed from
any cord storage area and is unrolled before use.

29. Never use this appliance in the immediate surrounds of a bath, a shower, or a

swimming pool or other liquids. The appliance must not be immersed in any
liquids.

30. Due to the risk of injury, never use this appliance for any purpose other than its

intended use. This appliance is intended for use in household and similar
applications such as staff kitchen areas in shops, offices and other working
environments; farm houses, by clients in hotels, motels, bed and breakfast type
environments and other residential type environments

31. Never use this appliance outdoors.
32. Never operate the appliance with a damaged cord or plug, after it malfunctions, or

if it has been damaged in any manner. Have the appliance checked and repaired
by a qualified electrician if repair is necessary.

33. Never place the unit in wardrobes or other enclosed spaces as this may cause fire

hazards.

Содержание GCPF160













Отзывы: