Assembling your Fan
The grove in the centre of the fan blade aligns with
a T-Bar on the motor spindle to ensure correct
positioning.
Fix the blade onto place by gently
hand tightening the spinner anticlockwise onto the
end of the motor spindle.
NOTE: The spinner is self-tightening; do not force
it.
Lift out all locking clips on the front safety grill.
Place the safety grill into position and secure it by
fastening the clips over the outer rim. The screw
and nut at the bottom of the grill must be fitted.
PLACEMENT OF THE WATER TANK
PLACEMENT OF THE MIST PIPE
Place the Mist Pipe through the middle of the Stand
Tubes then pull it up through the hole at the bottom
of the Control Panel.
Guide the Mist Pipe forward through the middle
hole in the Control Panel (Fig.9)
The two free ends of Mist Pipe should now be the
same as each other (length is 335mm).
After adjusting the length, push the top of the Mist
Pipe to attach it securely to the central hub on the
front of the grill (see Fig 10).
Attach the grey
plastic ring to the bottom of the Mist Pipe then
position it in the central hole on the top of the
water tank.
