Goldair GCEV130, Руководство по эксплуатации

Страница: 8 / 12

Operating your Evaporative Cooler
Timer
If you wish to turn the appliance off at a pre-determined time press the timer button. The
appliance can be set to turn off at any time between 1 hours and 8 hours (1hr increments).
To set the timer, turn the appliance on at the desired speed, press the timer button until the
desired run time is illuminated. The fan will turn off once the time has expired. If no time is
selected, the appliance will operate continuously.
Cool Mode
To initiate the cooling function press the cool button. This function blows normal air through a
water curtain to cool the air. Press the button again to switch this function off and the appliance
will operate in fan only mode.
Note: You must have water in the water tank for this function to work.
Note: It will take a few minutes for the cooler air to come out of the appliance.
Mode
When the fan is operating, press this button once to start the
sleep wind function. The sleep wind indicator light will be on.
Press this button again to change to natural wind. The natural wind indicator light will be on.
OSC (U D)
The vertical louvres (inside) can be set to your desired direction or allowed to oscillate side to
side by pressing this button.
OSC (L R)
The horizontal louvres can be set to your desired direction or allowed to oscillate up and down
by pressing this button.
Place the unit on a dry, level and sturdy surface.
When the power is turned on, the buzzer will sound
and the power icon on the LCD panel will light up.
On/Off
Press this button to start the fan and the Ionizer (the
ION function is set to start ON, shut OFF ON OFF, no
indication), Press this button again to turn off all
functions and return to standby.
Speed
Press speed to change fan speed from “low -mid-
high”, the relevant speed indicator LED will light up.
The display will show 01 (Low), 02 (Medium) or 03
(High), and the ambient temperature will be displayed
after 3 seconds.