Always choose a safe location for the Fan, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. This appliance
requires no installation, it should be used solely as a portable appliance.
WARNING:
Keep all objects at least 1 metre from the front, sides and rear
of the appliance.
Place the fan on a dry, level and sturdy
surface.
Ensure the fan speed control is on the OFF
position before plugging the power cord into
the socket.
Fan control switch
The control switch positions are:
•
0 = OFF
•
1 = Low Speed
•
2 = Medium Speed
•
3 = High Speed
To operate the fan, turn speed control dial
clockwise until desired wind speed is achieved.
To adjust the tilt angle, loosen both the larger
tilt adjustment knob and the smaller tilt range
knob, then tilt the head to the desired angle
and tighten both knobs.
To activate the oscillation function, push down
the oscillation pin on the top of the motor. The
fan will then oscillate until the pin is pulled
back up.
IMPORTANT! NEVER COVER THIS APPLIANCE!
Operating your Fan
Oscillation Pin
