.
Before First Use
Remove any manufacturing residues by
cleaning the unit:
1.
Fill unit to MAX with water
2.
Operate unit until all water has
dripped through
3.
Discard this water
This Drip Coffee Maker is designed for use
with water only.
DO NOT
put milk, liquid coffee or other
liquids into the unit‟s water reservoir.
DO NOT
plug in unit before you add water.
To avoid damage to the unit,
NEVER
turn
on the appliance with an empty water
reservoir.
This unit has a pre-set water level with
minimum level at
“MIN” and maximum level
at “MAX”. It is important that you do not
operate the unit with less water than the
MIN level or more water than the MAX
level.
This unit
DOES NOT
have an anti-drip
function.
DO NOT
remove coffee cups
during operation or coffee will drip out.
Unplug the product after use.
TO MAKE COFFEE
1.
DO NOT
turn unit on at wall or on unit
until after water is added.
2.
Place filter into the filter funnel in top
of unit.
3.
Add medium ground coffee -
approx.6g per cup.
4.
Fill water reservoir with required
quantity of water.
5.
Close upper cover.
6.
Place cups into position.
7.
Turn on at wall then turn on switch on
unit; the indicator light will turn on.
8.
Drip Coffee Maker will commence
operation.
9.
As soon as the coffee has finished
dripping through, turn off the unit and
unplug it.
10. Should you need to open the lid while
the unit is on, disconnect power and
wait a moment before opening lid.
Temperature Control Safety Device
If the appliance is
“ON” without water or
after it has finished brewing coffee, the
temperature will increase to a point before
the temperature control device cuts off the
power automatically. Unplug the device at
once.
Thermal Fuse Safety Device
This appliance is equipped with a second
safety device in case of Temperature
Control Safety Device malfunction. The
Thermal Fuse Safety Device will cut off the
power. Unplug the appliance at once. The
unit will not function again if the Thermal
Fuse Safety Device is activated.
Operating Your Drip Coffee Maker
