Goldacres Traymount T3 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 36

Goldacres Traymount T3 Скачать руководство пользователя страница 21

21

Suction Filter

It is essential to maintain all filters, and filter

screens, in good condition. Filter screens that

are not regularly cleaned can severely impede

the flow and thus affect delivery pressure.

If the screen is in any way damaged, it can

allow foreign material into the pumping

system which can result in damage to the

pump, lines, valves and nozzle tips. If the

screen is not properly fitted, it can allow air

into the pumping lines which will reduce the

performance of the pump. The filter screen

should be cleaned after every spraying

operation. The best way to clean the filter

screen is with a soft brush or compressed air

after washing the entire chemical residue from

the pump.

SAFETY SHUT-OFF VALVE

The safety shut off valve enables the filter bowl

to be removed while automatically shutting off

the supply line to the filter. As the filter bowl

is removed together with the bowl cap, the

valve plunger seats so as to seal off the filter

from the supply line. Replacing the filter bowl

unseats the valve plunger and thus opens the

supply line to the filter.

SUCTION FILTER CLEANING
WARNING:

Appropriate PPE must be worn

when cleaning filters.

1.

Ensure the pump is turned off.

2.

Carefully unscrew filter nut and remove

bowl and avoid contact with residual

chemical.

3. Remove screen and clean (with a soft

brush or compressed air).

4.

Check for damage to screen, bowl,body

and O-ring.

5.

Place screen back in position.

6. Make sure O-ring is in position for proper

seal.

7. Replace bowl and screw nut on. Do not

over-tighten nut.

«
...
19
20
21
22
23
...
»

Содержание Traymount T3





































Отзывы:

Нет отзывов