Goldacres ATV 200L Скачать руководство пользователя страница 22

22

Safety Decals

Understanding safety decals and their 
purpose assists in the safe operation of  
your sprayer� Safety decals are there for 
your protection and it is the responsibility 
of  the owner operator to replace damaged 
and/or missing safety decals� 
Regularly review safety decals with 
operators� It is very important to ensure 
that all new machine components and 
replacement parts include current hazard 
identification decals� 
Replacement safety decals can be ordered 
from all Goldacres dealers�

Identification 

When ordering parts or requesting service 
information for your sprayer it is important 
to quote the serial number of  your machine, 
and the purchase date, in order to receive 
accurate information� The location of  the 
serial number is shown in the picture� This 
number is located on the warning decal as 
indicated below�

Whenever you see this symbol it means: WARNING! BE ALERT! YOUR SAFETY MAY BE INVOLVED!
The information below explains these and other items requiring your attention. If in doubt consult operator’s manual. Read the important information below before operating 
the tractor. If in doubt consult operator’s manual. 

PRECAUTION

• Avoid boom damage. Speed must be reduced when directional changes are made.
• Flush chemicals from sprayer after use.

 • Keep clear of overhead, as contact can cause death.
 • Check the height of the sprayer before travelling under obstacles.
 • Do not open booms unless the sprayer is securely mounted to the towing vehicle.

CAUTION

•  Read chemical manufacturers WARNINGS, instructions and precautions and follow
  them exactly.
•  Avoid exposure to chemicals and spray drift, keep bystanders away.
•  Inspect and secure all guards before spraying.
•  Keep hands, feet, hair and clothing away from moving parts.
•  Do not allow persons to ride on sprayer.
•  Keep all chemical and hydraulic lines, fittings and couplers tight and free of leaks
  before starting and operating. 
•  Review safety instructions and safety devices with all operators regularly.  
•  Do not fill tank or operate boom when not attached to tractor.
•  Do not fold booms whilst the sprayer is moving.
•  Ensure booms are lowered onto the boom rest before moving.
•   Always raise booms off booms rests before unfolding.  
•   Keep bystanders clear when opening booms.

•  Remove lid from foam marker tank when bottom filling.
•  Clean foam marker air filter daily.    
•  Adjust needle valves to alter the foam concentration.
•  The water contained in the rinse water tanks is not suitable for drinking.

•  The tare weight of  this sprayer is approximately________kg. Make sure this weightdoes not exceed the    
  towing capacity of  the vehicle to which this sprayer is attached.
•  Ensure the equipment complies with all relevant road regulations when transporting.
•  It is imperative that the tractor manufacturers specifications are checked and that the                      

 

  implement, when full, does not exceed the carrying capacity of  the tractor.     
•  Do not stand on the access platform when the sprayer is in motion. Do not enter main product tank or   
  climb on main product tank.•  The diaphragm pump speed must be between 400 & 540 RPM, do not run  
  pump dry.• Select the right chemicals for the job, handle chemicals with care.
•  Do not start the machine without ensuring all people are well clear of  working parts.
•  Use relevant safety protection clothing and equipment when handling chemicals.
•  Refer to chemical manufacturers label for requirements.
•  If  operated incorrectly this machine could cause serious injury or death.
•  Read operator’s manual for all safety procedures.  • Check wheel nuts daily.
•  P.T.O shaft may need to be altered, always ensure the P.T.O cover is installed.
•  When unit is fitted with off  road, turf  or atv tyres maximum speed with tank loaded is

  20 klm, maximum speed with tank empty is 40klm”• “Always check with your state roads authority for   
  specific registration requirements”• Motor needs to be started regularly to ensure trouble free operation,  
  don’t allow fuel to become stale. All equipment should be tested regularly.

       

GA5063371

GA5013 EV

O_R2

KEEP BYSTANDERS

CLEAR OF BOOM

OPERATING AREA

STAND CLEAR

DRAIN

ONLY

GA5015971 EV

O_R2

GA5063371 decal

GA5015971 EVO_R2 decal

GA5013 EVO_R2 decal

Содержание ATV 200L





























Отзывы: