Setup Procedure
(AUDII AMP & Metal Detector)
Once you have connected the attachment to the AUDII
AMP. Clip it to the waist band of your harness, Fallow
the next steps and you will be ready to start detecting.
Connect the device to your detector by inserting
the 6.5mm male jack from the audio cable of the
device to your detector power pack or battery
audio output female jack.
Next turn on both machines and let the detector
go through its tuning cycle. On the
AUDII
adjust
the volume of your headphones or external
speaker to a comfortable level.
Know just adjust your threshold level and off you
go.
Note
: to load is not good, but to quiet is not good
ether. You have to hear the threshold working,
so you can hear the faint targets.
5
Looking for the it in the pile of
dirt
