12
POWER ADAPTER & SPEED CONTROL
CONNECTING THE POWER SUPPLY ADAPTER
Use only the original GOLD NOTE AC adapter to power the turntable to ensure
the correct functioning.
PLEASE NOTE: b
efore plugging the adapter in to the AC make sure the
connector is plugged into the turntable.
TURNTABLE SPEED CONTROL
• INNER BUTTON starts and stops the 33
⅓
rpm speed. When the 33
⅓
rpm is playing its red LED light turns on.
• OUTER BUTTON starts and stops the 45rpm speed.When the 45rpm is playing its red LED light turns on.
The turntable also features a fine speed adjustment “Pitch Control” function to achieve a precise control of the speed.
PITCH CONTROL MODE
To enter the PITCH CONTROL MODE press and hold for 4 seconds both the 33
⅓
rpm and the 45rpm buttons while the turntable
is spinning at 33
⅓
rpm or 45rpm until the red LED light shuts down.
The unit is now ready to adjust the speed with the help of the stroboscope.
• PITCH – press
repeatedly
the 33
⅓
rpm button until the correct speed is reached.
The LED light flashes every time the button is pressed.
• PITCH + press repeatedly the 45rpm button until the correct speed is reached.
The LED light flashes every time the button is pressed.
To switch off of the PITCH CONTROL MODE press and hold for 4 seconds both the 33
⅓
rpm and the 45rpm buttons until the LED
light is on and steady again.
DC in
TSC REAR PANEL
DC out
TURNTABLE
POWER
SOCKET
45
rpm
BUTTON
33
⅓
rpm
BUTTON
GOLD
NOTE
Turntable Speed
Control
33rpm
45rpm
