Gold Note PST-10, Руководство пользователя

Страница: 12 / 48

| SET-UP INSTRUCTIONS
5
The PST-10 is designed to power Gold Note
turntables featuring synchronous 12V motors
only.
There are three voltage settings, so the PST-
10 must be correctly set before installing it.
Powering a turntable with the wrong voltage
may result in damages to the motor.
PST-10 OUTPUT VOLTAGE SETTING
1
Connect the power cord to the AC outlet.
2
Switch on the master switch on the rear
panel of the PST-10.
3
Use the special tool supplied to select the
correct voltage by rotating the voltage
switch located on the rear panel.
The selected voltage setting is indicated
by the corresponding LED.
4
Now connect the PST-10 to your turntable
using the PST link cable supplied.
HOW TO FIND THE CORRECT
VOLTAGE FOR YOUR TURNTABLE
To find the correct voltage required by your
turntable, check the information printed on
the wall-wart originally supplied.
The voltage will be 18V, 26V or 34V.