Master Pop
Model No. 2451
© 2016 Gold Medal Products Co.
Part No. 49659
Setup
This unit has been tested at the factory.
1.
Remove all packaging and tape prior to operation. Remove accessories and carefully
remove kettle packed in cabinet interior.
2.
Place unit on a sturdy, level base.
3.
Unit has 4 glide feet preinstalled at the factory (see image below). Install a Black
Crutch Tip on each foot. Firmly push crutch tip over glide until it covers glide entirely.
4.
Tilt kettle and insert into hanger arms, then allow kettle to return naturally to an
upright position (see image below).
5.
Plug kettle lead into receptacle located on ceiling of cabinet interior. Align keyed or
hook shaped prong with the correct opening, then push plug all the way in and twist
or rotate to lock in place. To unplug, untwist kettle plug before attempting to pull from
receptacle.
6.
Door knobs are shipped in accessories pack located inside machine. Install a door
knob with magnet on popper door; install knob with screw on the old maid pan.
7.
Carefully install light bulb (do not over-tighten) into lamp holder located in cabinet
interior. Ensure unit is OFF and unplugged before installing or changing bulb
(reference Electrical Requirements section).
8.
After setup, unit should be cleaned prior to use (see Care and Cleaning section).
Black Crutch Tip
Glide
(pre-installed
at the factory)
General images shown for reference only.
Kettle shown
mounted in
hanger arms.
Kettle lead
shown plugged
into kettle
receptacle.
