Reddy
Apple
Cooker
3
Models
4008,
4008EX,
4016
and
4016EX
Installation Instructions
Inspection of Shipment:
Unpack all cartons and check thoroughly for any damage that may have occurred during transit.
Damage claims should be filed immediately with the transportation company. Gold Medal Products is
not responsible for damage that occurs in transit.
Setup:
Your Reddy Apple Cooker was assembled and tested at the factory. Remove all packing material and
tape before starting operation.
Electrical Requirements:
The following power supply must be provided:
Model # 4008: 120 Volt, 60 Cycle, 1515 Watts, 12.5 Amps
Model # 4016: 120 Volt, 60 Cycle, 1800 Watts, 15 Amps
Model # 4008 EX: 230 Volt, 50 Cycle, 1500 Watts, 6.5 Amps
Model # 4016 EX: 230 Volt, 50 Cycle, 1800 Watts, 7.8 amps
Your electrician must furnish sufficient power for proper machine operation. We recommend this
Cooker be on a dedicated and circuit protected line. Failure to wire properly will void the warranty and
may result in damage to the machine.
It is Gold Medal Products Company’s recommendation that this machine be plugged directly into a wall
outlet. The use of extension cords is not recommended due to safety concerns, and may cause
sacrificed and/or reduced performance.
Before You Plug In Machine:
1. Make sure the wall outlet can accept the grounded plugs (where applicable) on the power supply
cord.
2. The wall outlet must have the proper polarity. If in doubt, have a competent electrician inspect the
outlet and correct if necessary.
3.
DO NOT
use a grounded to un-grounded receptacle adapter.
WWW.CONCESSIONSTANDS.COM
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
concessionstands.com
