Gold Medal 2197NL, Инструкция по эксплуатации

Страница: 4 / 13

Lighted Nacho Cheese Warmer
with
Pump
M
ODELS
#2197NL, #2197NR
AND
#2197NS
1
INSTALLATION
CHECKING SHIPMENT
Unpack shipping carton and check thoroughly for any damage which may have occurred
during transit. Claims should be filed immediately with the transportation company.
ELECTRICAL REQUIREMENTS
Your condiment warmer is 120 volts, 330 watts, 60 cycle and will draw a maximum of 3 amps.
A 15 amp grounded circuit is required for 120V.
OPERATING INSTRUCTIONS
WARMER SHOULD NOT BE OPERATED WITHOUT WATER IN WELL.
USING THE CHEESE SERVER
1. Completely wash all interior parts of pump with hot soapy water as well as pumping hot
soapy water through pump before using the unit.
2. Do not use the warmer without water. Fill water well with 5 cups of water. With a setting of
“HI” water will completely evaporate in approximately two hours.
3. If pre-heating of the water is desired, set the heat control knob to “HI” for 15 minutes.
CAUTION: Prolonged setting on “HI” could result in overcooking.
4. Insert can or bowl into well and lower pump and lid assembly into cheese.
5. Plug in unit to wall socket.
6. Set control switch to "HI" setting.
7. Let cheese heat for 45 minutes (stirring every 15 minutes) before serving. Pump works
best when cheese is hot.
8. Turn heat control switch to “OFF” position when unit is not in use.
Machine must be properly grounded to prevent electrical shock.
These warmers are designed for the purpose of warming food.