Econo-Pop 14 Popper
Export Model No. 2121NSX
Page 5
gmpopcorn.com
Setup
This unit has been tested at the factory.
1.
Remove all packaging and tape prior to operation.
2.
Place the unit on a sturdy, level base.
3.
The popper unit has 4 glide feet preinstalled at the factory. Install a Black Crutch Tip
on each of the 4 glide feet. Firmly push the crutch tip over the glide until it covers the
glide entirely.
4.
The door knobs are shipped facing the inside of the machine. Re-adjust the door knobs
to face the outside of the machine.
5.
Carefully install the light bulb (do not over-tighten) into the lamp holder located in the
cabinet interior. Ensure the unit is OFF and unplugged before installing or changing
the bulb (reference the Electrical Requirements section).
6.
After setup, the unit should be cleaned prior to use (see Care and Cleaning section of
this manual).
